FINJET L
TECHNICAL SPECIFICATIONS
FinJet L-series is designed for flexible cutting in all environments. Flying bridge design enables the effective use of the machine from three different sides. No matter if you are running a small job shop or producing demanding parts 24/7, with L-series you will be able to correspond all needs of waterjet cutting.
- Cutting area: 1,5 x 3 – 2 x 15 m
- Z-axis: 200 / 300 mm
- Positioning accuracy: ± 0,08 mm/m
- Repeatability: ± 0,08 mm
- X and Y axis max speed: 15 / 40 m/min
- Cutting heads: 1 – 4, 2D
FINJET L
MACHINE SOLUTIONS
The FinJet L -series is designed to meet the needs of both small and large cutting needs. For smaller plates, the machine allows for cutting at one end and for inserting and collecting the plates at one end. The L-Series can be equipped with 1-4 cutting heads, either with single nozzle units with individual Z-axis or with a nozzle bar, whereby all nozzles are controlled by a single Z-axis. The FinJet L can also be fitted with a tube cutting unit.
FINJET L
PROPERTIES
MOVEMENT
In FinJet L models, the movement of the waterjet cutting machine is executed on a X-axis with a helical precision rack and pinion and on the Y-axis with Ø 40 mm precision ball screws. High-quality 2kW B&R (ABB) servomotors are equipped with absolute measurement, which allows the machine to be started without the need for extra home run. The bearings of the sleds are always mounted on precision guides with four bearings and at sufficient distances to eliminate vibration. The machine’s mechanics are designed for durability and longevity in all conditions.
PROTECTION
Since abrasive waterjet cutting machines are always exposed to at least abrasive and water, protection must be designed accordingly. In FinJet L models, the X-axis is always protected by a tight U-beam. The Y movement is protected by a round bell and the machine frame is covered to withstand extreme conditions.
ELECTRICITY & AUTOMATION
Electrical and automation design on all FinJet waterjet cutting machines are planned and executed by Muototerä’s own personnel. This allows optimum compatibility between mechanical and automation components. A good waterjet cutting machine is made from quality components, but it is not enough on its own. All parts must work together seamlessly. The purpose of Muototerä is always to make the waterjet cutting machines perform better than the sum of their parts. In practice, this means collaborative design with mechanical and automation design, so they are executed simultaneously for best results.
The electrical cabinets in FinJet L models are always designed with closed circle cooling, which makes the electrical and automation components more durable and the waterjet cutting machine less prone to failures. The machine is controlled by Muototerä’s own interface for water cutting. The HMI (Human Machine Interface) is a 21.5 ”Full HD touchscreen with a powerful 1.91GHz processor. The user interface has been designed based on the user experience so that it is simple yet powerful, offering all the features needed for effective waterjet cutting.
HIGH PRESSURE COMPONENTS
High pressure components play a critical role in waterjet cutting. As it is a high pressure device (3800 – 6200 bar), the high pressure components are subjected to extremely heavy stress. In addition to the self-made components, Muototerä uses components from KMT Waterjet. High-quality components guarantee the reliability of the machine at all pressure levels.
All FinJet waterjet cutting machines can be connected to any high-pressure pump, including old ones already at the client’s site. Muototerä is an official distributor of KMT High Pressure Pumps and a Premium OEM Partner. Our high pressure pump product range can be found here
SAFETY EQUIPMENT
- Safety light barrier
- Isolated cutting area with either fixed walls or mesh fence and sliding door
- Safety dump valve package, allows pressure relief from line without stopping pump
CUTTING TANK EQUIPMENT
- Water level adjustment to allow underwater cutting
- Automatically rising cover in front of the waterjet machine
- Splash protectors on the back and sides of the machine
- Stainless steel lamellas
- Stainless steel cutting tank and lamellas
- Abrasive removal system for waste abrasive, either fixed or mobile
- Pure water surface for abrasive waterjet cutting machines
- Stainless steel settling tank
- Water and pneumatic hoses and guns connected to the machine
CUTTING HEAD EQUIPMENT
- Multiple cutting heads: 2-4, nozzles with single or common Z-axis
- Automatic nozzle gap adjustment for 2-4 nozzles
- Height Sensor
- Drill Unit
- Collision Sensor
- Manual nozzle rotation ± 0… 45 degrees
- Sapphire crystal protected laser pointer for zero-point setting
- Sapphire or diamond waterjet orifice
- Integrated marking device
CONTROL EQUIPMENT
- Operator panel either in a movable rack or fixed on the machine
- Remote control, wireless or with cord
- Mobile alarms to your phone about machine and cutting status
- Multiple zero-point setting for automatic cutting job que
MACHINE EQUIPMENT
- Stainless steel frame
- Automatic machine lubrication system
- Tube cutting unit
ABRASIVE HANDLING EQUIPMENT
- Own infinitely variable sand feeder for each cutting head, 0 – 600g/min
- 200kg manual abrasive sieve or 1500 kg automatic abrasive bulk silo
HIGH PRESSURE PUMP ACCESSORIES
- Oil-air cooler
- Tool kit
- Spare parts kit
- Stroke control, multiple pumps on the same pressure line
Analog pressure gauge
- Pressure display and / or control directly from the machine control
- Line filter
- Water softener / water treatment
- Water booster pump
- 1000l Boosterline water tank to equalize inlet pressure
Read more about high pressure pumps
SOFTWARE FOR CUTTING PROGRAMS
- Read more about software
DESIGN YOUR WATERJET CUTTING MACHINE
Configure your own waterjet cutting machine! Design and request for quote of a waterjet cutting system by choosing the best fit from various options.
